Prof. Dr.-Ing. habil. Dipl.-Inf. Hinnerk Hagenah

Technische Fakultät

außerplanmäßige Professorinnen und Professoren

Adresse

Egerlandstraße 13 91058 Erlangen

Kontakt

E-Mail: hinnerk.hagenah@fau.de

Geschäftsführer des DFG Sonderfoschungsbereichs/Transregios 73
Sekretär der ESAFORM
Editor des Journals Production Engineering
Mitglied des DFG Sonderforschungsbereichs/Transregios 285
Mitglied der Graduate School of Advanced Optical Technologies
Mitglied im Center for Management Technology and Society (CMTS)
Mitglied des Scientific Committee der Internationalen Konferenz SheMet (Int. Conference on Sheet Metal)
Mitglied des Österreichischen Beirats „Produktion der Zukunft“

Lehrveranstaltungen im Sommersemester 2026

Methodische Analyse zur Qualitätsverbesserung von Fertigungsprozessen

Exercises in Production Technology I

Übung Produktionstechnik 1 für MB

Veröffentlichungen

Agirre J., Bernal D., Flipon B., Bernacki M., Brüggemann H., Bailly D., Merklein M., Hagenah H., Risse JH., Madej Ł., Muszka K., Cichocki K., Poloczek Ł., Bylya O., Reshetov A., De Laurentiis M., Barlier J., Stark A., Suhuddin UFH., Staron P., Klusemann B., Galdos L.:
The ESAFORM benchmark 2023: interlaboratory comparison benchmark for the characterization of microstructural grain growth and dynamic recrystallization kinetics of a single-phase Ni-base superalloy
In: International Journal of Material Forming 18 (2025), Article No.: 33
ISSN: 1960-6206
DOI: 10.1007/s12289-025-01893-9
URL: https://link.springer.com/content/pdf/10.1007/s12289-025-01893-9.pdf
Meschut G., Bobbert M., Duflou JR., Fratini L., Hagenah H., Martins PA., Merklein M., Micari F.:
Sheet Metal 2025
Millersville, PA 17551, USA: Materials research Forum LLC, 2025
(Materials Research Proceedings, Vol.52)
ISBN: 9781644903551
DOI: 10.21741/9781644903551
URL: https://d21zja6o12zyp0.cloudfront.net/9781644903551.pdf

Prakash V., Digavalli RK., Lenzen M., Hagenah H., Merklein M.:
Numerical simulation of sheet metal forming of an Al-Mg alloy incorporating plane strain properties in the yield criterion
In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 238 (2024), p. 373-384
ISSN: 0954-4054
DOI: 10.1177/09544054221135388

Merklein M., Hagenah H., Duflou J., Fratini L., Evangelista Martins Prado GM., Meschut G., Micari F.:
Sheet Metal 2023
Material Research Forum, 2023
ISBN: 9781644902417
DOI: 10.21741/9781644902417
Rohrmoser A., Hagenah H., Merklein M.:
Teilprojekt 4: Berücksichtigung funktionsrelevanter Gestaltabweichungen bei der Auslegung von Umformprozessen zur Herstellung von Stirnrädern mit Sonderverzahnung durch Fließpressen
In: Sandro Wartzack (ed.): Abschlussbericht DFG-Forschungsgruppe FOR 2271, 2. Phase.Prozessorientiertes Toleranzmanagement mit virtuellen Absicherungsmethoden, Erlangen: FAU University Press, 2023, p. 85-112
ISBN: 978-3-96147-660-2
DOI: 10.25593/978-3-96147-660-2
URL: https://opus4.kobv.de/opus4-fau/frontdoor/index/index/docId/23413
Schubert D., Rohrmoser A., Herzog C., Wolf M., Hagenah H., Merklein M., Drummer D.:
Influence of production process-induced surface topologies at varying roughness depths on the tribological properties of polyamide steel contact
In: Journal of Polymer Engineering 43 (2023), p. 187-197
ISSN: 0334-6447
DOI: 10.1515/polyeng-2022-0231

Rohrmoser A., Bode C., Schleich B., Hagenah H., Wartzack S., Merklein M.:
Influence of metal gear tooth geometry on load and wear within metal-polymer gear pairs
In: Applied Sciences 12 (2022), Article No.: 270
ISSN: 2076-3417
DOI: 10.3390/app12010270

Merklein M., Duflou J., Fratini L., Hagenah H., Martins PA., Meschut G., Micari F.:
Sheet Metal 2021
Trans Tech Publications, 2021
ISBN: 9783035736939
DOI: 10.4028/b-A24ugP
Merklein M., Duflou J., Fratini L., Hagenah H., Martins PA., Meschut G., Micari F.:
Sheet Metal 2021. Selected peer-reviewed full text papers from the 19th International Conference on Sheet Metal (SheMet 2021)
Bäch: Trans Tech Publications Ltd., 2021
(Key Engineering Materials, Vol.883)
ISBN: 978-3-0357-1693-1
DOI: 10.4028/www.scientific.net/KEM.883
Rohrmoser A., Hagenah H., Merklein M.:
Adapted tool design for the cold forging of gears from non-ferrous and light metals
In: International Journal of Advanced Manufacturing Technology (2021)
ISSN: 0268-3768
DOI: 10.1007/s00170-020-06449-6
Rohrmoser A., Hagenah H., Merklein M.:
Influence of the forming induced hardening on the wear behavior of aluminum gears within a metal-plastic material pairing and targeted adaption
49th SME North American Manufacturing Research Conference, NAMRC 2021 (Cincinnati, OH, 21. Juni 2021 - 25. Juni 2021)
In: Livan Fratini, Ihab Ragai (ed.): Procedia Manufacturing 2021
DOI: 10.1016/j.promfg.2021.06.078

Prakash V., Kumar DR., Horn A., Hagenah H., Merklein M.:
Modeling material behavior of AA5083 aluminum alloy sheet using biaxial tensile tests and its application in numerical simulation of deep drawing
In: International Journal of Advanced Manufacturing Technology 106 (2020), p. 1133-1148
ISSN: 0268-3768
DOI: 10.1007/s00170-019-04587-0
URL: https://link.springer.com/content/pdf/10.1007/s00170-019-04587-0.pdf
Rohrmoser A., Heling B., Schleich B., Hagenah H., Merklein M.:
Ausgewählte Einflussgrößen auf die erzielbaren Verzahnungstoleranzen beim Kaltfließpressen.
In: Sandro Wartzack (ed.): Summer School Toleranzmanagement - Beiträge zur 4. Summer School - September 2020, Erlangen: 2020
Schubert D., Rohrmoser A., Hagenah H., Merklein M., Drummer D.:
Verschleißmodellierung am Beispiel einer Polyamid-Stahl-Getriebepaarung für das prozessorientierte Toleranzmanagement
Summer School Toleranzmanagement (Erlangen, 28. September 2020 - 28. September 2020)
In: Sandro Wartzack (ed.): Beiträge zur 4. Summer School 2020

Hagenah H., Schulte RK., Vogel M., Hermann J., Scharrer H., Lechner M., Merklein M.:
4.0 in metal forming - Questions and challenges
12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2018 (Naples, 18. Juli 2018 - 20. Juli 2018)
In: Roberto Teti (ed.): Procedia CIRP 2019
DOI: 10.1016/j.procir.2019.02.055
Heling B., Oberleiter T., Rohrmoser A., Kiener C., Schleich B., Hagenah H., Merklein M., Willner K., Wartzack S.:
A concept for process-oriented interdisciplinary tolerance management considering production-specific deviations
22nd International Conference on Engineering Design (ICED) (Delft, 5. August 2019 - 8. August 2019)
In: Proceedings of the 22nd International Conference on Engineering Design (ICED19), Cambridge, United Kingdom: 2019
DOI: 10.1017/dsi.2019.351
URL: https://www.cambridge.org/core/services/aop-cambridge-core/content/view/2DD6B2058F383E18C465C8731DBE9666/S2220434219003512a.pdf/concept_for_processoriented_interdisciplinary_tolerance_management_considering_productionspecific_deviations.pdf
Heling B., Oberleiter T., Rohrmoser A., Kiener C., Schleich B., Hagenah H., Merklein M., Willner K., Wartzack S.:
Berücksichtigung von produktionsspezifischen Abweichungen im interdisziplinären Toleranzmanagement
Industriekolloquium der Forschergruppe FOR 2271 (Erlangen, 5. Februar 2019 - 5. Februar 2019)
In: Wartzack (ed.): Industriekolloquium der Forschergruppe FOR 2271, Stamsried: 2019
URL: https://www.archiv.mfk.tf.fau.de?file=pubmfk_5c6a7ad28207e
Prakash V., Kumar DR., Merklein M., Hagenah H.:
Numerical simulation of hydraulic bulging using uniaxial and biaxial flow curves and different yield criteria
38th International Deep Drawing Research Group Annual Conference, IDDRG 2019 (Enschede, 3. Juni 2019 - 7. Juni 2019)
In: Ton van den Boogaard, Javad Hazrati, Nico Langerak (ed.): IOP Conference Series: Materials Science and Engineering 2019
DOI: 10.1088/1757-899X/651/1/012038
Rohrmoser A., Hagenah H., Merklein M.:
Berücksichtigung funktionsrelevanter Gestaltabweichungen bei der Auslegung von Umformprozessen zur Herstellung von Stirnrädern mit Sonderverzahung durch Fließpressen
Industriekolloquium der Forschungsgruppe FOR 2271
In: S. Wartzack (ed.): Industriekolloquium der Forschungsgruppe FOR 2271, Stamsried: 2019
Rohrmoser A., Heling B., Schleich B., Kiener C., Hagenah H., Wartzack S., Merklein M.:
A methodology for the application of virtual evaluation methods within the design process of cold forged steel pinions
22nd International Conference on Engineering Design (, 5. August 2019 - 9. August 2019)
In: Proceedings of the 22nd International Conference on Engineering Design (ICED19), Delft, The Netherlands: 2019
DOI: 10.1017/dsi.2019.352
Rohrmoser A., Kiener C., Hagenah H., Merklein M.:
Einsatz numerischer Analysetools bei der Auslegung und Herstellung kaltfließgepresster Stahlzahnräder
In: Konstruktion (2019), p. 85-90
ISSN: 0720-5953
Rohrmoser A., Kiener C., Hagenah H., Merklein M.:
Influence of tribological conditions on application relevant component properties of cold forged gears
In: Production Engineering (2019)
ISSN: 0944-6524
DOI: 10.1007/s11740-019-00909-z
Rohrmoser A., Kiener C., Hagenah H., Merklein M.:
Untersuchung des Einsatzverhaltens kaltfließgepresster Zahnräder
34. Jahrestreffen der Kaltmassivumformer (Düsseldorf, 27. Februar 2019 - 28. Februar 2019)
In: VDI Wissensforum GmbH (ed.): 34. Jahrestreffen der Kaltmassivumformer 2019
Rohrmoser A., Kiener C., Schubert D., Hagenah H., Drummer D., Merklein M.:
Targeted influencing of the mission-relevant component properties of cold-forged gearwheels
In: Konstruktion 2019 (2019), p. 94-98
ISSN: 0720-5953
Rohrmoser A., Kiener C., Schubert DW., Hagenah H., Drummer D., Merklein M.:
Gezielte Beeinflussung der einsatzrelevanten Bauteileigenschaften kaltfließgepresster Zahnräder
In: Konstruktion (2019), p. 94-98
ISSN: 0720-5953
Schubert D., Rohrmoser A., Hagenah H., Merklein M., Drummer D.:
Einfluss der fertigungsbedingten Gestalt und Struktur auf das Einlaufverhalten von Stahl-Kunststoff-Getriebepaarungen
Industriekolloquium der Forschergruppe FOR 2271 (Erlangen)
In: Industriekolloquium der Forschergruppe FOR 2271 2019
Schubert D., Rohrmoser A., Hertle S., Wartzack S., Hagenah H., Merklein M., Drummer D.:
New Approach on the Allocation of Wear Allowances - a Case Study
22nd International Conference on Engineering Design (ICED19) (Delft, 5. August 2019 - 8. August 2019)
DOI: 10.1017/dsi.2019.358

Lorenz R., Hagenah H., Merklein M.:
Experimental Evaluation of Cold Forging Lubricants Using Double-Cup-Extrusion-Tests
In: Materials Science Forum 918 (2018), p. 65-70
ISSN: 0255-5476
DOI: 10.4028/www.scientific.net/MSF.918.65
Lorenz R., Hagenah H., Merklein M.:
Influence of the coating process on the tribological conditions during cold forging with a MoS2 based lubricant
In: AIP Conference Proceedings 2018
DOI: 10.1063/1.5034867
Papke T., Huber F., Hagenah H., Schmidt M., Merklein M.:
Potentiale der Kombination von Umformtechnik und additiver Fertigung in hybriden Prozessketten
6. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung

Merklein M., Hagenah H.:
Introduction to sheet-bulk metal forming
In: Production Engineering 10 (2016), p. 1-3
ISSN: 0944-6524
DOI: 10.1007/s11740-016-0661-z
Purr S., Wendt A., Meinhardt J., Moelzl K., Werner A., Hagenah H., Merklein M.:
Data-driven inline optimization of the manufacturing process of car body parts
In: IOP Conference Series: Materials Science and Engineering 159 (2016), p. 012002
ISSN: 1757-8981
DOI: 10.1088/1757-899X/159/1/012002

Hagenah H., Geiger M.:
Laser Adjustment Using Actuators
In: A. Erman Tekkaya, Werner Homberg, Alexander Brosius (ed.): 60 Excellent Inventions in Metal Forming 2015
DOI: 10.1007/978-3-662-46312-3_26
Hagenah H., Merklein M., Lechner M., Schaub A., Lutz S.:
Determination of the mechanical properties of hot stamped parts from numerical simulations
In: Procedia CIRP 33 (2015), p. 167-172
ISSN: 2212-8271
DOI: 10.1016/j.procir.2015.06.031
Merklein M., Duflou JR., Leacock AG., Micari F., Hagenah H.:
Sheet Metal 2015
FAU University Press, 2015
ISBN: 9783038269113
DOI: 10.4028/b-P2sRW2

Merklein M., Franke J., Hagenah H.:
WGP Congress 2014
Trans Tech Publications, 2014
ISBN: 9783038266297
DOI: 10.4028/b-tPf3BF
Plettke R., Vipavc D., Grüner M., Hagenah H., Merklein M.:
The influence of the annealing process in the fabrication of helical needles for the suture in deep wound cavities
In: International Journal of Computer Integrated Manufacturing 27 (2014), p. 960-967
ISSN: 0951-192X
DOI: 10.1080/0951192X.2013.820350
Tsoupis I., Hildering S., Hagenah H., Merklein M.:
Werkstoffschädigung in der Prozesskette Schneiden - Biegen
17. Workshop Simulation in der Umformtechnik
In: Liewald, M.; Tekkaya, A. E. (ed.): 17. Workshop Simulation in der Umformtechnik 2014

Hagenah H., Geiger M., Merklein M.:
Numerical simulation to improve robustness in sheet metal forming process chains
In: AIP Conference Proceedings 1532 (2013), p. 683-688
ISSN: 0094-243X
DOI: 10.1063/1.4806895
Lechner M., Kuppert A., Hagenah H., Merklein M.:
Optimization of the heat treatment layout and blank outline of THTB
In: Key Engineering Materials 554-557 (2013), p. 2465-2471
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.554-557.2465
Merklein M., Franke J., Hagenah H.:
WGP Congress 2013
FAU University Press, 2013
ISBN: 9783038261728
DOI: 10.4028/b-J3cWyK
Merklein M., Hagenah H., Kaupper M., Schaub A.:
Analysis of the deformation behavior of Ti-6Al-4V at elevated temperatures
In: Key Engineering Materials 554-557 (2013), p. 29-32
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.554-557.29
Merklein M., Hagenah H., Kaupper M., Schaub A.:
Mechanical response of Ti-6Al-4V alloy on deformation at moderate temperatures
In: Key Engineering Materials 549 (2013), p. 311-316
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.549.311
Merklein M., Hagenah H., Lechner M., Kuppert A.:
Simulationsgestützte Auslegung maßgeschneiderter wärmebehandelter Aluminiumhalbzeuge
16. Workshop Simulation in der Umformtechnik
In: Tekkaya A. E.; Liewald M. (ed.): 16. Workshop Simulation in der Umformtechnik 2013
Merklein M., Hagenah H., Schneider T.:
Blechmassivumformung - Stand der Technik und Ausblick
2. Workshop Blechmassivumformung
In: Merklein, M.; Behrens, B. A., Tekkaya, A. E. (ed.): 2. Workshop Blechmassivumformung 2013
Merklein M., Hagenah H., Schneider T.:
Sheet-Bulk Metal Forming Processes - State of the Art and its Perspectives
TTP 2013 - Tools and Technologies for Processing Ultra High Strength Materials
In: Kolleck, R. (ed.): TTP 2013 - Tools and Technologies for Processing Ultra High Strength Materials 2013

Hagenah H., Böhm W., Breitsprecher T., Merklein M., Wartzack S.:
Modelling, Construction and Manufacture of a Lightweight Robot Arm
8th CIRP (Mailand)
In: Proceedings of the 8th CIRP International Conference on Intelligent Computation in Manufacturing Engineering 2012
DOI: 10.1016/j.procir.2013.09.037
Li HZ., Dong XH., Shen Y., Zhou R., Diehl A., Hagenah H., Engel U., Merklein M., Cao J.:
Analysis of microbending of CuZn37 brass foils based on strain gradient hardening models
In: Journal of Materials Processing Technology 212 (2012), p. 653-661
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2011.10.007
Li Hezong ., Dong Xianghuai ., Huang Suxia ., Diehl A., Hagenah H.:
Material Intrinsic Length in Plastic Strain Gradient Theory and Microbending Process of Metal Foils
In: Advanced Materials Research 403-408 (2012), p. 685-690
ISSN: 1022-6680
DOI: 10.4028/www.scientific.net/AMR.403-408.685
Merklein M., Allwood J., Behrens BA., Brosius A., Hagenah H., Kuzman K., Mori Ki., Tekkaya AE., Weckenmann A.:
Bulk forming of sheet metal
In: CIRP Annals - Manufacturing Technology 61 (2012), p. 725-745
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2012.05.007
Merklein M., Hagenah H.:
Material Forming ESAFORM 2012
2012
ISBN: 9783038136903
DOI: 10.4028/b-0Pugx5
Plettke R., Vipavc D., Grüner M., Hagenah H., Merklein M.:
Prototype Manufacturing of Helical Needles for Suture in Deep Wound Cavities
1st Int.Conf. Design and Processes for medical devices PROMED (Rivolti (TO))
In: E. Ceretti, A. Fiorentino, L. Giorleo, C. Giardini (ed.): Proc. 1st Int.Conf. Design and Processes for medical devices PROMED 2012

Li HZ., Dong XH., Wang Q., Shen Y., Diehl A., Hagenah H., Engel U., Merklein M.:
Size effects of CuZn37 brass foil in microforming
In: Cailiao Kexue yu Gongyi/Material Science and Technology 19 (2011), p. 15-19
ISSN: 1005-0299
Li Hezong ., Dong Xianghuai ., Wang Qian ., Shen Yu ., Diehl A., Hagenah H., Engel U., Merklein M.:
Determination of material intrinsic length and strain gradient hardening in microbending process
In: International Journal of Solids and Structures 48 (2011), p. 163-174
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2010.09.016

Hagenah H., Vipavc D., Plettke R., Merklein M.:
Numerical Model of Tube Freeform Bending by Three-Roll-Push-Bending
2nd International Conference on Engineering Optimization (Lissabon)
In: Associacao Portuguesa de Mecanica Teória, Aplicada e Computacional (ed.): 2nd International Conference on Engineering Optimization 2010
Hagenah H., Vipavc D., Vatter P., Cojutti M., Plettke R.:
Creation of the Data Base for the Process Design of the Three-Roll-Push Bending Process
In: Teti, R. (ed.): 7th CIRP Int. Conf. Intelligent Computation in Manufacturing Engineering 2010
Li H., Dong X., Huang S., Diehl A., Hagenah H.:
Material intrinsic length in plastic strain gradient theory and microbending process of metal foils
6th International conference on MEMS NANO, and Smart Systems (ICMENS 2010)
In: 6th International conference on MEMS NANO, and Smart Systems (ICMENS 2010) 2010
Li, H. Z., Dong, X. H., Shen, Y., Alexander Diehl, Hinnerk Hagenah, Ulf Engel, Marion Merklein:
Size effects on springback behaviors due to plastic strain gradient hardening in microbending process of pure aluminum foils
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 257 (2010), p. 4497-4504
ISSN: 0921-5093
DOI: 10.1016/j.msea.2010.03.105
Plettke R., Vatter P., Vipavc D., Cojutti M., Hagenah H.:
Investigation on the Process Parameters and Process Window of "Three-Roll-Push-Bending"
In: Hinduja, S.; Li, L. (ed.): Proc. 36th Matador Conf. 2010

Cojutti M., Vipavc D., Hagenah H., Merklein M.:
An innovative approach for the process design for three-roll bending of plain tubular components
In: Angeles Gutierrez, M.; Sedlmaier, A.; Galdós, L. (ed.): Proc. 1st Int. Congress on Roll Forming 2009
Geiger M., Plettke R., Hagenah H.:
Multi-Objective Optimization of Actuator System Design for Laser Micro Adjustment
In: Production Engineering 3 (2009), p. 181-188
ISSN: 0944-6524
DOI: 10.1007/s11740-008-0147-8
Li HZ., Dong XH., Shen Y., Diehl A., Hagenah H., Engel U., Merklein M.:
Influence of the plasticity strain gradient on springback in micro-bending process of metal foils
In: Chinese Society of Mechanical Engineering (ed.): Proceedings of The 2nd Asia Conference on micro/nano sized technology (AWMFT-2009) 2009
Merklein M., Hagenah H., Cojutti M.:
Investigations on Three-Roll Bending of Plain Tubular Components
In: Key Engineering Materials 410-411 (2009), p. 325-334
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.410-411.325
Plettke R., Hagenah H., Geiger M.:
Application of genetic algorithms for the optimisation of actuator systems for laser micro adjustment.
In: International Journal of Microstructure and Materials Properties 4 (2009), p. 615-625
ISSN: 1741-8410

Geiger M., Klämpfl F., Hagenah H.:
Automated online planning of localized laser process parameters using simulated annealing
In: Production Engineering 2 (2008), p. 171-178
ISSN: 0944-6524
DOI: 10.1007/s11740-007-0071-3
Hagenah H., Plettke R., Geiger M.:
Algorithms for Planning and Control of Laser Forming
In: Vollertsen, F. (ed.): Proceedings of the IWOTE 08 2008
Hagenah H., Plettke R., Klämpfl F.:
Fast, problem specific approaches for the evaluation of laser beam propagation in process planning
6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (Naples)
In: Teti, R. (ed.): Proceedings of the 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering 2008
Hagenah H., Schmidt M., Klämpfl F.:
Planning the use of high-power excimer laser for psoriasis treatment
Manufacturing Systems and Technologies for the New Frontier - The 41st CIRP Conference on Manufacturing Systems (London)
In: Mitsuishi, M.; Ueda, K.; Kimura, F. (ed.): Manufacturing Systems and Technologies for the New Frontier - The 41st CIRP Conference on Manufacturing Systems 2008
DOI: 10.1007/978-1-84800-267-8_71
Klämpfl F., Hagenah H.:
Algorithmen zum simulationsbasierten, pulsgenauen Planen von Laserbestrahlungen
19th Conference on Simulation and Visualization (SimVis) (Magdeburg)
In: Schulze, T.; Preim, B. (ed.): Simulation und Visualisierung 2008. Proceedings of the 19th Conference on Simulation and Visualization (SimVis) 2008
Klämpfl F., Schmidt M., Hagenah H.:
Intelligent irradiation planning for new laser applications
18th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2008) (Skövde)
In: De Vin, L. (ed.): Proceedings of the 18th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2008) 2008
Merklein M., Geiger M., Hagenah H., Cojutti M.:
3-Rollen-Schubbiegen zur flexiblen Herstellung freiformgebogener Rohrleitungen
In: Zukunftstechnologien in Bayern, 2008, p. 24-26
Plettke R., Hagenah H., Geiger M.:
Developing a computer aided design system for actuator design for laser micro adjustment
18th CIRP International Design Seminar (March 2008)
In: Proceedings of the 18th CIRP International Design Seminar (March 2008) 2008

Klämpfl F., Hagenah H.:
Algorithms for pulsewise irradiation planning
In: Geiger, M.; Otto, A.; Schmidt, M. (ed.): Proceedings of the LANE 2007 2007
Plettke R., Hagenah H., Geiger M.:
Application of genetic algorithms for the optimization of actuator systems for laser micro adjustment
In: Kuzman, K. (ed.): Proceedings of the 6th International Conference on Industrial Tools and Material Processing Technologies 2007 (ICIT&MPT 2007) 2007
Plettke R., Hagenah H., Geiger M.:
Computer assisted design of actuator systems for laser micro adjustment
In: Key Engineering Materials 344 (2007), p. 807-814
ISSN: 1013-9826
DOI: 10.4028/0-87849-437-5.807
Plettke R., Hagenah H., Geiger M.:
Rechnergestützter Entwurf von Aktorsystemen für die lasergebundene Mikrojustage
In: Schulze, T.; Preim, B.; Schumann, H. (ed.): Simulation und Visualisierung 2007. Proceedings of the 18th Conference on Simulation and Visualization (SimVis) 2007
Tang B., Zhao Z., Hagenah H., Lu X.:
Energy based algorithms to solve initial solution in one-step finite element method of sheet metal stamping
In: Computer Methods in Applied Mechanics and Engineering 196 (2007), p. 2187-2196
ISSN: 0045-7825
DOI: 10.1016/j.cma.2006.11.015

Geiger M., Hagenah H.:
Der SFB 396 im Überblick- Beiträge zum Berichts- und Industriekolloquium
In: Geiger, M.; Singer, R. F: (ed.): Robuste, verkürzte Prozessketten für flächige Leichtbauteile: Tagungsband zum Industriekolloquium 2006
Hagenah H., Geißdörfer S.:
System for the automatic correction of sheet metal bending angles by means of laser beam forming
In: Juster, N.; Rosochowski, A (ed.): The 9th International Conference on Metal Forming ESAFORM 2006
Hagenah H., Kohlbauer R.:
Apllication of fuzzy logic for process design in sheet metal hydroforming
In: Govekar, E. (ed.): Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations 2006
Hagenah H., Plettke R., Geiger M.:
Planning and Control of Laser Forming Applications
In: Butala, P.; Hlebanja, G (ed.): Proceedings of the 39th CIRP International Seminar on Manufacturing Systems 2006
Klämpfl F., Schmidt M., Hagenah H., Geiger M.:
Algorithms for Irradiation Planning in Medical Laser Applications
In: Teti, R. (ed.): Proceedings of the 5th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering 2006
Klämpfl F., Schmidt M., Hagenah H., Görtler A., Wolfsgruber F., Lampalzer R., Kaudewitz P.:
Irradiation planning for automated treatment of psoriasis with a high-power excimer laser
In: SPIE (ed.): Photonics West 2006: Integrated Optoelectronic Devices 2006
DOI: 10.1117/12.646449

Geiger M., Hagenah H., Hutterer A.:
Task Specific Registration Algorithmy within the Closed Loop Control of Laser Forming Processes
In: Production Engineering 2 (2005), p. 125-130
ISSN: 0944-6524
Hagenah H., Wurm T.:
Problem specific design of actuators for micro adjustment
In: Advanced Materials Research 6-8 (2005), p. 271-278
ISSN: 1022-6680
Hagenah H., Wurm T., Geiger M.:
Computer assisted design of actuators for high precision adjustment in micro technology
In: Bramley, A.; Brissaud, D.; Coutellier, D.; Mcmahon, C (ed.): Advances in Integrated Design and Manufacturing in Mechanical Engineering 2005

Geiger M., Hagenah H., Kohlbauer R.:
Computer assisted, knowledge based process design for sheet metal hydroforming using finite element simulation
In: Monostori, L. (ed.): Enterprises, production networks 2004
Hagenah H., Kohlbauer R., Geiger M.:
Knowledge based automated process design using finite element intermediate states
In: Teti, R. (ed.): Proceedings of the 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering. ICME' 2004. Sorrento, Italy 2004
Hutterer A., Hagenah H.:
Correcting non circular dents by means of laser beam forming
LANE 2004 (Bamberg)
In: Geiger, M.; Otto, A. (ed.): Laser Assisted Net shape Engineering 4 - Proceedings of the LANE 2004 2004

Geiger M., Wurm T., Hagenah H.:
Modellierung von Aktoren für das Laserstrahljustieren in der Mikrotechnik
In: Hohmann, R. (ed.): Fortschritte in der Simulationstechnik, Tagungsband des 17. Symposiums Simulationstechnik ASIM 2003 2003
Hagenah H.:
Simulation based Evaluation of the Accuracy for Sheet Metal Bending caused by the Bending Stage Plan
In: Weber, C.; Bley, H.; Hirt, G. (ed.): Proceedings of the 36th CIRP Seminar on Manufacturing Systems, Progress in Virtual Manufacturing Systems 2003
Hagenah H.:
Simulationsbasierte Bestimmung der zu erwartenden Maßhaltigkeit für das Blechbiegen (Dissertation, 2003)
DOI: 10.25593/3-87525-192-X
Hutterer A., Hagenah H., Geiger M.:
Development of an irradiation strategy withing a closed loop control system for the laser adjustment of deformation
In: The Institute of Control, Automation and Systems Engineers (ICASE) (ed.): Proceedings of the 2003 International Conference on Control, Automation and Systems (ICCAS 2003) 2003
Hutterer A., Hagenah H., Otto A.:
Application of a modified ICP-Algorithm in Manufacturing Technology
In: Ertl, T.; Girod, B.; Greiner, G.; Niemann, H.; Seidel, H. (ed.): 8th International Fall Workshop 2003
Kohlbauer R., Hagenah H., Geiger M.:
Process design for hydroforming of sheet metal pairs using a closed loop controlled finite element simulation
SheMet 2003
In: Shirvani, B.; Geiger, M.; Kals, H.J.J.; Singh, U.P. (ed.): Proceedings of the 10th International Conference on Sheet Metal, SheMet 2003 2003

Wurm T., Menzel T., Müller B., Hagenah H., Geiger M.:
The use of kinematic chains and construction catalogues for an advanced design of complex actuator geometries in micro adjustment
In: Kjellberg, T. (ed.): Proceedings: International CIRP Design Seminar: Design in the New Economy; Design Theory, Methodology and its Intergration with the Computational Tools to support Teams of Competence 2001

Geiger M., Hagenah H., Menzel T.:
Simulation based optimisation of the accuracy of sheet metal bending parts caused by the manufacturing plan
In: Teti, R. (ed.): Proceedings of the 2nd CIRP International Seminar of Intelligent Computation in Manufacturing Engineering ICME 2000 2000
Menzel T., Hagenah H.:
Knowledge Based Approach for Intelligent Design of Manufacturing Processes
In: Bothe, H.; Fyfe, C. (ed.): Proceedings of the EIS'2000. Second ICSC Symposium on Engineering of Intelligent Systems 2000

Hagenah H., Backes F.:
Computer aided estimation of achievable accuracy for bending parts
In: Geiger, M.; Shirvani, B.; Sing, U.P. (ed.): Sheet Metal 1998: Proceedings of the 6th International Conference on Sheet Metal 1998
Hagenah H., Knoblach J.:
Bewertung von Fertigungsplänen der Blechverarbeitung in Abhängigkeit von der erreichbaren Bauteilgenauigkeit
In: Lehnert, W. (ed.): Qualitätsfaktor Umformtechnik: Tagungsband der 5. Sächsischen Fachtagung Umformtechnik in Freiberg 1998

Adresse

Kontakt

Lehrveranstaltungen im Sommersemester 2026

Vorlesung mit Übung

Hauptseminar

Tutorium

Übung

Veröffentlichungen

2025

2024

2023

2022

2021

2020

2019

2018

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2001

2000

1998