Dr.-Ing. Simon Wituschek

Kontakt

simon.wituschek@fau.de

Projekte

Wandlungsfähiges Fügen mit Hilfsfügeteil

Veröffentlichungen

Harms A., Wituschek S., Lechner M., Merklein M.:
Tailored multi-material systems with thickness distribution by orbital forming
In: CIRP Annals - Manufacturing Technology (2025)
ISSN: 0007-8506
DOI: 10.1016/j.cirp.2025.03.026
Lechner M., Borgert T., Busch M., Harms A., Holtkamp P., Kappe F., Römisch D., Wituschek S.:
Non-destructive testing in versatile joining processes
21st International Conference on Sheet Metal (Paderborn, 1. April 2025 - 3. April 2025)
In: G. Meschut, M. Bobbert, J. Duflou, L. Fratini, H. Hagenah, P. Martins, M. Merklein, F. Micari (ed.): Sheet Metal 2025 2025
DOI: 10.21741/9781644903551-12
Lüder S., Holtkamp P., Wituschek S., Bobbert M., Meschut G., Lechner M., Schmale HC.:
Analysis of the binding mechanisms depending on versatile process variants of self-piercing riveting
Sheet Metal 2025 (Paderborn, 1. April 2025 - 3. April 2025)
In: Materials Research Proceedings 52 2025
DOI: 10.21741/9781644903551-13
Nathrath P., Baier B., Herz N., Wituschek S., Raed Ramzi Y., Merklein M., Li M., Lederle F., Wasserscheid P., Hübner E., Schühle P.:
Hydrogen release from liquid organic hydrogen carrier using plate catalysts in continuous and dynamic operation
In: Chemical Engineering Journal 506 (2025), Article No.: 159878
ISSN: 1385-8947
DOI: 10.1016/j.cej.2025.159878

Hetzel A., Wituschek S., Römisch D., Sippel F., Lechner M., Merklein M.:
Investigation on the load-bearing capacity and joint formation of hybrid functional components joined by orbital forming
In: Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering (2024)
ISSN: 0954-4089
DOI: 10.1177/09544089241282807
Wituschek S., Elbel L., Lechner M.:
Influence of the process time on a self-piercing riveting process with tumbling kinematic
In: Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering (2024)
ISSN: 0954-4089
DOI: 10.1177/09544089241248430
Wituschek S., Römisch D., Lechner M., Merklein M.:
Investigation on the limp properties of formed foils for hydrogen applications
In: IOP Conference Series: Materials Science and Engineering 1307 (2024), Article No.: 012031
ISSN: 1757-8981
DOI: 10.1088/1757-899X/1307/1/012031

Kappe F., Wituschek S., de Pascalis V., Bobbert M., Lechner M., Meschut G.:
Numerical Investigation of the Influence of a Movable Die Base on Joint Formation in Semi-tubular Self-piercing Riveting
In: Materials Design and Applications IV, Springer Science and Business Media Deutschland GmbH, 2023, p. 137-149 (Advanced Structured Materials, Vol.168)
DOI: 10.1007/978-3-031-18130-6_10
Lechner M., Kappe F., Römisch D., Rostek T., Wituschek S.:
Innovative mechanical joining processes in versatile process chains - potentials, applications and selection procedures
Sheet Metal 2023 - 20th International Conference on Sheet Metal (Nürnberg, 2. April 2023 - 5. April 2023)
In: Materials Research Proceedings 2023
DOI: 10.21741/9781644902417-13
Merklein M., Jäckisch M., Kuball CM., Römisch D., Wiesenmayer S., Wituschek S.:
Mechanical joining of high-strength multi-material systems - trends and innovations
In: Mechanics & Industry 24 (2023), p. 1-20
ISSN: 2257-7777
DOI: 10.1051/meca/2023013
Wituschek S., Elbel L., Lechner M.:
Influence of the process time on a self-piercing riveting process with tumbling kinematic
3rd International Conference on Advanced Joining Processes (Braga, 19. Oktober 2023 - 20. Oktober 2023)
In: 3rd International Conference on Advanced Joining Processes 2023 2023
Wituschek S., Elbel L., Lechner M.:
Versatile self-piercing riveting with a tumbling superimposed punch
26th International ESAFORM Conference on Material Forming (Kraków, 19. April 2023 - 21. April 2023)
DOI: 10.21741/9781644902479-122
Wituschek S., Kappe F., Meschut G., Lechner M.:
Combination of versatile self-piercing riveting processes
International Conference on Sheet Metal 2023 (Nuremberg, 2. April 2023 - 5. April 2023)
In: Materials Research Proceedings 2023
DOI: 10.21741/9781644902417-16

Buffa G., Fratini L., La Commare U., Römisch D., Wiesenmayer S., Wituschek S., Merklein M.:
Joining by forming technologies: current solutions and future trends
In: International Journal of Material Forming 15 (2022)
ISSN: 1960-6206
DOI: 10.1007/s12289-022-01674-8
Kappe F., Wituschek S., Bobbert M., Meschut G.:
Determining the properties of multi-range semi-tubular self-piercing riveted joints
In: Production Engineering (2022)
ISSN: 0944-6524
DOI: 10.1007/s11740-022-01105-2
Kappes F., Wituschek S., Bobbert M., Lechner M., Meschut G.:
Joining of multi-material structures using a versatile self-piercing riveting process
In: Production Engineering (2022)
ISSN: 0944-6524
DOI: 10.1007/s11740-022-01151-w
Kupfer R., Köhler D., Römisch D., Wituschek S., Ewenz L., Kalich J., Weiß D., Sadeghian B., Busch M., Krüger J., Neuser M., Grydin O., Böhnke M., Bielak CR., Troschitz J.:
Clinching of Aluminum Materials – Methods for the Continuous Characterization of Process, Microstructure and Properties
In: Journal of Advanced Joining Processes (2022)
ISSN: 2666-3309
DOI: 10.1016/j.jajp.2022.100108
Meschut G., Merklein M., Brosius A., Drummer D., Fratini L., Füssel U., Gude M., Homberg W., Martins PAF., Bobbert M., Lechner M., Kupfer R., Gröger B., Han D., Kalich J., Kappe F., Kleffel T., Köhler D., Kuball CM., Popp J., Römisch D., Troschitz J., Wischer C., Wituschek S., Wolf M.:
Review on mechanical joining by plastic deformation
In: Journal of Advanced Joining Processes (2022)
ISSN: 2666-3309
DOI: 10.1016/j.jajp.2022.100113
Römisch D., Hetzel A., Wituschek S., Lechner M., Merklein M.:
Pin Extrusion for Mechanical Joining from Orbital Formed Tailored Blanks with Local Material Pre-Distribution
In: Journal of Manufacturing and Materials Processing 6 (2022), p. 127
ISSN: 2504-4494
DOI: 10.3390/jmmp6060127
Wituschek S., Kappe F., Meschut G., Lechner M.:
Geometric and mechanical joint characterization of conventionally and tumbled self-piercing riveting joints
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2022), p. 146442072211354
ISSN: 1464-4207
DOI: 10.1177/14644207221135400
Wituschek S., Lechner M.:
Investigation of the influence of the tumbling angle on a tumbling self-piercing riveting process
In: Proceedings of the Institution of Mechanical Engineers Part L-Journal of Materials-Design and Applications (2022), p. 146442072210800
ISSN: 1464-4207
DOI: 10.1177/14644207221080068
Wituschek S., Lechner M.:
Mechanical and geometrical characterisation of tumbling self-piercing riveting joints in multi-material-systems
In: IOP Conference Series: Materials Science and Engineering 1270 (2022), p. 012124
ISSN: 1757-8981
DOI: 10.1088/1757-899X/1270/1/012124
Wituschek S., Lechner M.:
Versatile tool design for a tumbling self-piercing riveting process
The 12th Tooling Conference & Exhibition, Tooling 2022 (Örebro, 25. April 2022 - 27. April 2022)

Friedlein J., Wituschek S., Lechner M., Mergheim J., Steinmann P.:
Inverse parameter identification of an anisotropic plasticity model for sheet metal
40th International Deep-Drawing Research Group Conference (IDDRG) (, ELECTR NETWORK)
In: INTERNATIONAL DEEP-DRAWING RESEARCH GROUP CONFERENCE (IDDRG 2021), BRISTOL: 2021
DOI: 10.1088/1757-899X/1157/1/012004
Wituschek S., Kappe F., Lechner M.:
Investigation of the influence of varying tumbling strategies on a tumbling self-piercing riveting process
In: Production Engineering (2021)
ISSN: 0944-6524
DOI: 10.1007/s11740-021-01099-3
Wituschek S., Lechner M.:
Friction Characterisation for a Tumbling Self-Piercing Riveting Process
In: Key Engineering Materials 883 (2021), p. 27-34
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.883.27
Wituschek S., Lechner M.:
Investigation of the Influence of the Tumbling Angle on a Tumbling Self-Piercing Riveting Process
2nd International Conference on Advanced Joining Processes AJP 2021
DOI: 10.1177/14644207221080068
Wituschek S., Lechner M.:
Material characterisation methods for a tumbling self-piercing riveting process
24th International ESAFORM Conference on Material Forming, ESAFORM 2021 (, 14. April 2021 - 16. April 2021)
In: ESAFORM 2021 - 24th International Conference on Material Forming 2021
DOI: 10.25518/esaform21.398

Kappe F., Wituschek S., Lechner M., Bobbert M., Meschut G., Merklein M.:
Investigation of influencing parameters on the joint formation of the self-piercing riveting process
Material Science and Engineering Congress - MSE 2020 (Darmstadt, 22. September 2020 - 25. September 2020)
Lechner M., Christ T., Frey P., Wituschek S., Arzhanov A., Petrov F., Merklein M.:
Blockchain in sheet metal processing.
In: wt Werkstattstechnik - Online 110 (2020), p. 704-708
ISSN: 1436-4980
DOI: 10.37544/1436-4980-2020-10-60
Streit FJ., Wituschek S., Pschyklenk M., Becher A., Lechner M., Wildermann S., Pitz I., Merklein M., Teich J.:
Data acquisition and control at the edge: a hardware/software-reconfigurable approach
In: Production Engineering 14 (2020), p. 365-371
ISSN: 0944-6524
DOI: 10.1007/s11740-020-00964-x
Wituschek S., Kuball CM., Merklein M., Lechner M.:
Test method for friction characterization of rivets
In: Defect and Diffusion Forum 404 DDF (2020), p. 132-137
ISSN: 1012-0386
DOI: 10.4028/www.scientific.net/DDF.404.132

Frey P., Lechner M., Bauer T., Shubina T., Yassin A., Wituschek S., Virkus M., Merklein M.:
Blockchain for forming technology - Tamper-proof exchange of production data
38th International Deep Drawing Research Group Annual Conference, IDDRG 2019 (Enschede, 3. Juni 2019 - 7. Juni 2019)
In: Ton van den Boogaard, Javad Hazrati, Nico Langerak (ed.): IOP Conference Series: Materials Science and Engineering 2019
DOI: 10.1088/1757-899X/651/1/012046

Dr.-Ing. Simon Wituschek

Kontakt

Projekte

Veröffentlichungen

2025

2024

2023

2022

2021

2020

2019