Dr. Stefan Geißdörfer

Mitarbeiterprofil

No projects found.

Geißdörfer S.:
Mesoskopisches Modell zur Abbildung von Größeneffekten mit Methoden der FE-Simulation für die Klatmassivumformung
In: Vollertsen, F. (ed.): Größeneinflüsse bei Fertigungsprozessen, Beiträge zum Abschlußkolloquium des DFG-SPP 1138 2009

Eichenhüller B., Engel U., Geißdörfer S.:
Process parameter interaction in microforming
In: BOISSE, P. (ed.): Proceedings of the 11th ESAFORM2008 conference on material forming 2008
DOI: 10.1007/s12289-008-0092-2
Engel U., Geißdörfer S., Weidel S., Eichenhüller B.:
Ursache und Wechselwirkung in der Mikroumformtechnik
In: Mikroproduktion (2008), p. 39-43
ISSN: 1614-4538
Geißdörfer S., Engel U., Geiger M.:
A Novel Approach for In-Situ Observation of Local Deformation Behaviour at Micro Scale
In: Yang, D.Y. (ed.): Proceedings of the 9th International Conference on Technology of Plasticity 2008
Geißdörfer S., Engel U., Geiger M.:
Simulation of Microforming Processes by Applying a Mesoscopic Model
4th International Conference on Multi-Material Micro Manufacture (Dunbeath, Scotland)
In: Menz, W.; Dimov, S. (ed.): Proceedings of the 4th International Conference on Multi-Material Micro Manufacture 2008
Geißdörfer S., Rosochowski A., Olejnik L., Engel U.:
Micro-extrusion of an ultrafine grained copper can
4th International Conference on Multi-Material Micro Manufacture (Dunbeath, Scotland)
In: Menz, W.; Dimov, S. (ed.): Proceedings of the 4th International Conference on Multi-Material Micro Manufacture 2008
Geißdörfer S., Rosochowski A., Olejnik L., Engel U., Richert MM.:
Micro-extrusion of ultrafine grained copper
In: Boisse, P. (ed.): Proceedings of the 11th International Esaform Conference on Material Forming 2008
DOI: 10.1007/s12289-008-0093-1

Diehl A., Geißdörfer S., Engel U.:
Investigation of Size Dependent Mechanical Properties of Metal Foils in Micro Sheet Metal Forming Processes
In: Clemson University (ed.): Proceedings of the 2nd International Conference on Micromanufacturing, 10.-13. September 2007, Greenville, USA 2007
Geiger M., Geißdörfer S.:
Mesoscopic Model - Advanced Simulation of Microforming Processes
In: AIP Conference Proceedings 907 (2007), p. 79-84
ISSN: 0094-243X
Geiger M., Geißdörfer S.:
Mikroproduktion? Chancen und Herausforderung
In: Hirt, G. (ed.): 22. ASK, Aachener Stahlkolloquium 2007
Geißdörfer S.:
Advanced Approach to Evaluate Local Deformation Behaviour at Microscale
In: BIAS-Verlag (ed.): Proceedings of the 2nd International Conference on New Forming Technology 2007
Herrero A., Esmoris J., Azcarate S., Geißdörfer S., Engel U.:
Application of EDM to the production of micro tooling
4M 2007, Third International Conference on Multi-Material Micro Manufacture (Dunbeath, Scotland)
In: Menz, W.; Dimov, S., Toshev, Y. (ed.): 4M 2007, Third International Conference on Multi-Material Micro Manufacture 2007

Engel U., Geißdörfer S.:
Microforming - on the way to industrial application?
In: American Society of Mechanical Engineers (ed.): Proceedings of the 1st International Conference on Micromanufacturing 2006
Engel U., Geißdörfer S.:
Microforming Technology - History and Future
In: Juster, N.; Rosochowski,A. (ed.): The 9th International Conference on Metal Forming ESAFORM 2006
Geißdörfer S., Diehl A., Eichenhüller B., Engel U.:
Microforming - Application and 3D Simulation
In: TETI, R. (ed.): Proceedings of the 5th CIRP Seminar on Intelligent Computation in Manufacturing Engineering 2006
Hagenah H., Geißdörfer S.:
System for the automatic correction of sheet metal bending angles by means of laser beam forming
In: Juster, N.; Rosochowski, A (ed.): The 9th International Conference on Metal Forming ESAFORM 2006

Engel U., Geißdörfer S.:
Simulation in Microforming
In: Kuzman, K. (ed.): Proceedings of the 5th International Conference on Industrial Tools 2005
Geißdörfer S.:
An advanced approach in simulation of microforming processes
In: Menz, W.; Dimov, S. (ed.): Proceedings of the 1st International Conference 4M 2005
Geißdörfer S., Engel U., Geiger M.:
Erweitertes Mesoskoisches Modell zur FE-Berechnung komplexer Mikroumformprozesse
In: Vollertsen, F. (ed.): Proceedings of the 2nd Colloquium of DFG Priority Program Process Scaling 2005
Geißdörfer S., Engel U., Geiger M.:
Simulation of Microforming Processes - An Advanced Approach Apllying a Mesoscopic Model
In: Proceedings of the 8th International Conference on Technology of Plasticity (ICTP) 2005
Geißdörfer S., Putz A., Engel U.:
Microforming - Current State and Future Demands
In: Journal of Mechanical Engineering (2005), p. 492-505
ISSN: 1823-5514
Meyer L., Herzig N., van Putten K., Hirt G., Justinger H., Korthäuer M., Henning M., Braun J., Hundertmark A., Geißdörfer S.:
Messtechnik in der Umformtechnik - die Ergebnisse des Ringversuches der Umformer im Rahmen des SPP 1138
In: Proceedings of the 2nd Colloquium of DFG Priority Program Process Scaling 2005

Geißdörfer S., Engel U.:
Mesoscopic Model - Simulation of Size Effects in Microforming
In: Akademia Górniczo-Hutnicza (ed.): Proceedings of the 10th International Conference Metal Forming 2004 (19.-23.09.) 2004
Geißdörfer S., Engel U., Geiger M.:
FE-Simulation of Microforming Process Applying a Mesoscopic Model
In: International Journal of Machine Tools and Manufacture (2004), p. 1222-1226
ISSN: 0890-6955

Geißdörfer S., Engel U., Geiger M.:
Mesosopic Model - Simulative Approach to the Scatter of Process Factors in Microforming
In: Vollertsen, F. (ed.): Proceedings of the 1st Colloquium of DFG Priority Program Process Scaling 2003